PNI ML145 400W+Magnetic Base hz cb antenna 26-28M

CB PNI ML145 antenna performance: - The performance of the product is closely related to the technical characteristics of the antenna under ideal conditions of installation and use: SWR <= 1.0, maximum applied short time 400 W, impedance 50 Ohms, stainless steel etc. Communication distance: - The distance of communication is another decisive factor in the acquisition and use of a CB antenna. Thus, the maximum communication distance of 15 km is reached in ideal working conditions: calibrated antenna, open field without obstacles, station with maximum legal power of 4W and with standard reception. Any obstacle such as hills, mountains, buildings, walls can reduce this distance. Length of the antenna: - The length of the antenna is another very important factor that can influence the communication distance in traffic. The longer the antenna is, the longer the range is. The CB PNI ML145 antenna has a length of 145 cm. Magnetic base: - The PNI 145 / PL magnetic base has a diameter of 145 mm, a size that gives the antenna stability even at high speeds, with a nice design. Threaded fastener: - The PNI145 / PL is compatible with antennas that have an internal threaded fastening system. Threaded fastener: - The PNI145 / PL is compatible with antennas that have an internal threaded fastening system. Powerful magnet: - The PNI145 / PL has a powerful magnet for its size, which gives it a very good grip on the car dome, and resilience and stability even at high speeds. Plug PL259: - The PNI 145 / PL magnetic base is equipped with RG58 coaxial cable and PL259 socket for direct connection to the station. Rubber support included: - In order to protect the car´s dome from scratches, but without affecting the optimal performance of the antenna, the 145 / PL magnetic base is provided with a thin and durable rubber support that also protects the water connections and joints inside it. Specifications: - Working frequency: 26 - 28 Mhz - Number of channels: 90 - Maximum applied power: 400W - Minimum SWR in the center of the band: 1.0 - Length: 145 cm - impedance: 50 Ohm - Material: Stainless steel - Tip connector: PL259 - Hole diameter (mm): 16 mm - Cable length (m): 4m - Weight: 280 g - Antenna length (framing): 101 - 170 cm - dimensions: 164x10x3 cm antenna base 15x15x6 cm - Working distance: 15 km - Magnetic base: Magnetic base PNI 145 / PL 145mm - The package contains - Magnetic base: 145 mm