WOLF TOOTH Drop ST Sram Boost oval chainring

Oval direct mount single chainring compatible with Sram crankset and Boost 3mm frame (148mm rear axle) and 52mm chainline.

Compatibility.

-For Boost frames:3mm offset and 52mm chainline or drivetrain compatibility with Super Boost bikes.

-Attachment via 3 bolts on the rear of the spider near the axle.

Use the same 3 original Sram screws to attach the Wolf Tooth chainring.

-Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.

-With Praxis Works mountain cranks using 3mm offset.

-You will need clearance between the chainring and chainstay for a chainring two teeth larger than the elliptical chainring (maximum diameter is that of a chainring two teeth larger).

-If using a 9-speed drivetrain, use a 10-speed chain (shifts and works well on a 9-speed drivetrain and adjusts the ring tighter for better chain retention).

Not compatible.

-NOT compatible with SRAM 8-bolt direct mount cranksets.

-NOT compatible with other chains.

Chain Compatibility:Drop-Stop ST for Shimano Hyperglide+ 12-speed and KMC 12-speed chains.

Recommendations.

-The use of a clutch style rear derailleur is recommended for best chain security.

-A T25 Torx wrench is required to remove the bolts holding the chainring or spider to the crank.

-An L-wrench works best as the crank shaft may contact a bushing adapter and prevent proper engagement.

-Use the same 3 original Sram bolts to secure the Wolf Tooth crankset.

Features.

-Use:Mtb.

-Mounting:Direct Mount.

-Ovality:10%.

-Chain Compatibility:Drop-Stop ST.

-Weight according to sprocket:28t - 60g | 30t - 68g | 32t - 74g | 34t - 83g | 36t - g.

-Material:Aluminum 7075-T6.

-Made:in USA